Honda K20 / K24 K-Swap Shifter Cables and Transmission Bracket for Civic EG / EK / Integra DC2

Product Overview

This shifter cable and transmission bracket kit is designed for K-series engine swaps into older Honda chassis such as the Civic EG and EK and the Integra DC2. A K-swap pairs a K20 or K24 engine with a cable-operated manual gearbox, while these older cars were built with rod-type linkages. A cable and bracket kit bridges that gap, allowing the K-series gearbox to be shifted from the original console position.

Key Features and Benefits

• Shifter cables for K-series manual gearboxes
• Aluminium transmission cable bracket
• Silver finish
• Designed for EG, EK and DC2 K-swaps
• Helps create a clean, reliable shift setup

Vehicle Compatibility

The supplier lists this kit for K20 and K24 swaps into the Honda Civic EG and EK and the DC2, referencing RSX-type shifter cables, with a year range of 1988-2000. Fitment depends on your chosen shifter box, gearbox and mounts. Fitment is supplier-stated and not independently verified, so please confirm compatibility with your swap components before ordering.

Product Specifications

• Product type: shifter cables and transmission bracket
• Material: aluminium
• Colour: silver
• Transmission type: manual
• Application: K20 / K24 K-swap
• Package size: 35 x 30 x 8 cm
• Gross weight: approx. 2.2 kg

Installation and Usage

The bracket mounts to the K-series gearbox to hold the cable ends, and the cables are routed through the firewall or floor to a compatible shifter assembly in the cabin. Route the cables with smooth bends and away from exhaust heat, then adjust them so every gear engages fully. Check reverse lockout and gear selection carefully before driving. Because engine swaps involve many interrelated parts, professional installation by an experienced swap specialist is recommended.

Package Contents

Shifter cables and transmission bracket as pictured. The supplier has not confirmed whether a shifter box, grommets, clips or hardware are included, so other contents are not confirmed.

Important Fitment Notice

Engine swaps on road vehicles in New Zealand typically require LVV certification. Please send us your VIN or chassis number together with details of your engine and gearbox so we can help confirm suitability.