{"title":"Link ECU","description":"","products":[{"product_id":"link-ecu-air-temperature-sensor-iatb","title":"Link ECU - Air Temperature Sensor (IATB)","description":"\u003cp\u003eIncludes Plug Kit - 2 way Bosch Style plug, terminals and boot\u003cbr\u003e\nAluminium and steel weld in mounting bosses available (IATBMA \u0026amp; IATBMS)\u003c\/p\u003e","brand":"LINK ECU","offers":[{"title":"Default Title","offer_id":41355045961800,"sku":"101-0048","price":273.12,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/1823297634_c1e04cb8-e835-4dcd-ac06-ccbd00b24327.jpg?v=1788926866"},{"product_id":"g4x-atomx","title":"G4X AtomX ECU","description":"\u003cp\u003eAtomX Small, but mighty! The AtomX can control up to 2 rotors or 4 cylinders with sequential injection and direct spark. Or, it can be used for up to eight cylinders using batch fire. Now featuring Knock Control. This makes it ideal for naturally aspirated engines that just need a re-tune and don't need all the extra sensors and features that come with our higher level ECUs. The Link G4X AtomX ECU may be our entry-level ECU but don't let its size fool you. The AtomX has expanded data logging and uses the same microcontroller as the entire G4X range! The processing unit is more responsive and has higher bandwidth than its G4+ Atom II predecessor. G4X features 512 megabytes of logging at 32bit using up to 250 channels, each limited to up to 1kHz per channel (by the Operating System), with a maximum of 100 k Samples\/sec. G4X features 8 x faster communications speed than G4+ ECUs, allowing you to download logs 8 x faster and pushes all the logging quickly up to a new and improved PC Link – available for download below in the features tab. The AtomX is an automotive control unit. Requires \"A\" loom. The AtomX is ideal for: 1-12 Cylinder Distributed 2-8 Cylinder Wasted Spark 1-4 Cylinder Direct Spark Odd Fire Engines 2-Stroke Engines Configurable Firing Order Configurable TDC Points (for odd fire)\u003c\/p\u003e\u003cp\u003eAs a genuine Link Engine Management product, this ECU is stocked and supplied by AutoCentre Parts New Zealand, giving Kiwi builders and tuners access to Link's full engine management ecosystem. AutoCentre Parts stocks the wider Link ECU range - from ECUs and plug-in solutions through to looms, sensors, dashes and CAN accessories - so you can source everything your engine build needs from one trusted New Zealand supplier. Pair this ECU with the appropriate loom, sensors and a qualified tuner to get the most from your engine build, and reach out to our team if you need help selecting compatible parts for your project. All Link ECU products sold through AutoCentre Parts are genuine, warranted items backed by local support and fast New Zealand-wide shipping.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649600584,"sku":"ACP-01402","price":1163.44,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/111-4000.1.jpg?v=1790043475"},{"product_id":"g4x-monsoonx","title":"G4X MonsoonX ECU","description":"\u003cp\u003eMonsoonX More features, more powerful. The MonsoonX will control up to 2 rotors or 4 cylinders with sequential injection and direct spark. Or, it can be used for up to eight cylinders using batch fire. This makes it ideal for naturally aspirated or turbocharged engines that just need a retune and one or two extra features, so you don’t need to jump up to one of our higher-level ECUs. The MonsoonX processing unit has been upgraded to provide 512 megabytes of data logging, meaning you can log much more data at a faster sample rate. Control loops are also more precise compared to its G4+ predecessor, along with advancements such as single precision floating point format fuel tables, better resolution within ignition timing and faster communications. These upgrades make the G4X Monsoon a true powerhouse in a small shell. The G4X logging features 512 megabytes at 32bit using up to 250 channels, each limited to up to 1kHz per channel (by the Operating System), with a maximum of 100 k Samples\/sec. With the MonsoonX you have all the tuning capabilities of the AtomX, but you can also choose to run some of the following features: Launch Control, Anti-lag, VVT Control and Closed Loop Boost Control. It also comes with a built in 4 bar or 7 bar MAP sensor further reducing installation cost. Now featuring Knock Control. Note: The MonsoonX will run any of the above features, but it cannot run them all at once. The number of features you can run is dependent on how many of the limited Inputs and Outputs each feature needs. The MonsoonX is an Automotive Control Unit. Requires A Loom. The MonsoonX is ideal for: 1-12 Cylinder Distributed 2-8 Cylinder Wasted Spark 1-4 Cylinder Direct Spark Odd Fire Engines 2-Stroke Engines Configurable Firing Order Configurable TDC Points (for odd fire)\u003c\/p\u003e\u003cp\u003eAs a genuine Link Engine Management product, this ECU is stocked and supplied by AutoCentre Parts New Zealand, giving Kiwi builders and tuners access to Link's full engine management ecosystem. AutoCentre Parts stocks the wider Link ECU range - from ECUs and plug-in solutions through to looms, sensors, dashes and CAN accessories - so you can source everything your engine build needs from one trusted New Zealand supplier.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649633352,"sku":"ACP-01401","price":1694.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/127-4000.1.jpg?v=1790043476"},{"product_id":"g4x_monsoon_bundle","title":"G4X Monsoon Wire-In Bundle - ECU + Loom + Sensors","description":"\u003cp\u003eG4X Monsoon Wire-In Bundle. Everything you need to get started wiring a Link G4X MonsoonX ECU into your chosen vehicle. This package is ideal for four cylinder engines requiring a few additional features. Link G4X MonsoonX ECU Medium A Loom - 2.5m length A loom for G4X ECUs (MonsoonX) Air temperature sensor Coolant temperature sensor 10 bar Pressure sensor\u003c\/p\u003e\u003cp\u003eBecause every component in the bundle is chosen by Link Engine Management to work together, you avoid the risk of accidentally pairing an ECU with an incompatible loom or sensor. This bundle is put together by Link Engine Management to take the guesswork out of parts selection, and is supplied through AutoCentre Parts New Zealand as a genuine, complete package. Buying the ECU, loom and sensors together in one bundle typically works out more cost-effective than sourcing each part separately, and ensures everything you need to begin wiring is included from day one. Our team can talk you through the bundle contents and confirm it is the right fit for your engine and vehicle before you order.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649666120,"sku":"ACP-01400","price":2438.44,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/127-9800B.0.jpg?v=1790043477"},{"product_id":"g4x-stormx-ecu-v3","title":"G4X StormX","description":"\u003cp\u003ePositioned between Link's entry-level and premium G4X ECUs, the StormX delivers performance, flexibility and value. It includes all the core G4X features expected from Link's championship-winning platform, including CAN Bus, Flex Fuel, Flexible engine protection limiters, CAN Keypad Control, VVT Control, Open and Closed Loop Boost Control and 512MB of data logging. The StormX includes increased I\/O and advanced functionality beyond Link's entry-level ECUs with additional injector and ignition drives, auxiliary outputs, digital inputs, and temperature inputs. It also introduces advanced tuning features including a built-in Trigger Oscilloscope, Stepper Motor Idle Control and Rotary Oil Metering Pump Control. Drawing from Link's premium G4X range, the StormX also supports some advanced motorsport features including Nitrous Control, Launch Control, Full Gear Shift Control and Anti-Lag, making it a smart choice for high-performance street and motorsport applications. The StormX is the ideal solution for builds requiring expanded I\/O and some advanced tuning capability, without needing the extra features that come with our premium ECUs. Models Supported The StormX can control up to 4 rotors or 8 cylinders with sequential injection and direct spark.\u003c\/p\u003e\u003cp\u003eAs a genuine Link Engine Management product, this ECU is stocked and supplied by AutoCentre Parts New Zealand, giving Kiwi builders and tuners access to Link's full engine management ecosystem. AutoCentre Parts stocks the wider Link ECU range - from ECUs and plug-in solutions through to looms, sensors, dashes and CAN accessories - so you can source everything your engine build needs from one trusted New Zealand supplier. Pair this ECU with the appropriate loom, sensors and a qualified tuner to get the most from your engine build, and reach out to our team if you need help selecting compatible parts for your project. All Link ECU products sold through AutoCentre Parts are genuine, warranted items backed by local support and fast New Zealand-wide shipping.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649698888,"sku":"ACP-01399","price":2470.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/108-4000.1.jpg?v=1790043480"},{"product_id":"g4x-furyx","title":"G4X FuryX","description":"\u003cp\u003eA premium ECU with Onboard Digital Wideband. The FuryX is a premium ECU like the XtremeX, but with added Onboard Digital Wideband Lambda Control. Now on the G4X platform, the FuryX features a faster processor, faster communications \u0026amp; a huge 512 megabytes of data logging! With 8 injector drives and 6 ignition drives, the FuryX can control up to 3 rotors or 6 cylinders with sequential injection and direct spark, making it an excellent choice for professional level motorsport or more demanding road car applications. The added benefit of a Onboard Digital Wideband Lambda Controller means higher accuracy of the unit, plus a simple setup. The FuryX comes supplied with stickers, a quickstart guide, a mounting bracket and a USB tuning cable. Requires 'A' \u0026amp; 'B' Looms or 'A' \u0026amp; 'B' Pin Kits, not supplied. See the Specifications tab for a full list of specifications. If you are after more inputs, outputs or features, consider the G5 Voodoo.\u003c\/p\u003e\u003cp\u003eAs a genuine Link Engine Management product, this ECU is stocked and supplied by AutoCentre Parts New Zealand, giving Kiwi builders and tuners access to Link's full engine management ecosystem. AutoCentre Parts stocks the wider Link ECU range - from ECUs and plug-in solutions through to looms, sensors, dashes and CAN accessories - so you can source everything your engine build needs from one trusted New Zealand supplier. Pair this ECU with the appropriate loom, sensors and a qualified tuner to get the most from your engine build, and reach out to our team if you need help selecting compatible parts for your project. All Link ECU products sold through AutoCentre Parts are genuine, warranted items backed by local support and fast New Zealand-wide shipping.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649764424,"sku":"ACP-01397","price":2969.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/122-4000.1.jpg?v=1790043483"},{"product_id":"g4x_fury_bundle","title":"G4X FuryX Wire-In Bundle - ECU + Looms + Sensors","description":"\u003cp\u003eG4X Fury Motorsport Bundle. Everything you need to get started wiring a Link G4X FuryX into your chosen beast! This is the ideal package for engines with up to six cylinders and wanting to run onboard digital wideband lambda control. G4X FuryX - A premium ECU with Onboard Digital Wideband. A loom medium - 2.5 m long 'A' loom to suit G4X (FuryX) B loom medium - 2.5 m long 'B' loom to suit G4X (FuryX) Air Temperature Sensor Coolant Temperature Sensor Pressure sensor - for oil or fuel pressure up to 10 bar Combined pressure and temperature sensor\u003c\/p\u003e\u003cp\u003eBecause every component in the bundle is chosen by Link Engine Management to work together, you avoid the risk of accidentally pairing an ECU with an incompatible loom or sensor. This bundle is put together by Link Engine Management to take the guesswork out of parts selection, and is supplied through AutoCentre Parts New Zealand as a genuine, complete package. Buying the ECU, loom and sensors together in one bundle typically works out more cost-effective than sourcing each part separately, and ensures everything you need to begin wiring is included from day one. Our team can talk you through the bundle contents and confirm it is the right fit for your engine and vehicle before you order.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649797192,"sku":"ACP-01396","price":4244.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/122-9800B.0.jpg?v=1790043483"},{"product_id":"g5-voodoo-neo-6","title":"G5 Voodoo Neo 6","description":"\u003cp\u003eG5 Voodoo Neo 6 The next generation of engine management for many more engines. The G5 Voodoo Neo 6 can run: 8 cylinders with port or direct injection and direct spark, 6 cylinders with direct\/port staged injection and direct spark The G5 Voodoo processing units are the perfect choice for professional-level motorsport. For more information please see the Features and Specifications tab or view our Product Introduction page here. The G5 Voodoo Neo 6 works on a variety of vehicles. Please contact a LinkECU Reseller or Technical Support for advice regarding your specific project.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eG5 Voodoo Neo 6 ECUUSB-C Connection Cable\u003c\/li\u003e\n\u003cli\u003eWi\u003c\/li\u003e\n\u003cli\u003eFi Antenna4m GPS Antenna (Magnetic or Adhesive Mount) USB-C and SMA Dust Covers Quick Start Guide (A5) Installer I\/O Table (A3) Link stickers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs a genuine Link Engine Management product, this ECU is stocked and supplied by AutoCentre Parts New Zealand, giving Kiwi builders and tuners access to Link's full engine management ecosystem. AutoCentre Parts stocks the wider Link ECU range - from ECUs and plug-in solutions through to looms, sensors, dashes and CAN accessories - so you can source everything your engine build needs from one trusted New Zealand supplier. Pair this ECU with the appropriate loom, sensors and a qualified tuner to get the most from your engine build, and reach out to our team if you need help selecting compatible parts for your project. All Link ECU products sold through AutoCentre Parts are genuine, warranted items backed by local support and fast New Zealand-wide shipping.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649829960,"sku":"ACP-01395","price":4988.44,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/156-5000.Neo.0.jpg?v=1790043485"},{"product_id":"g5-voodoo-neo-4","title":"G5 Voodoo Neo 4","description":"\u003cp\u003eG5 Voodoo Neo 4 The next generation of engine management for many more engines. The G5 Voodoo Neo 4 can run:6 cylinders port or direct injection and direct spark, or, 4 cylinders with direct\/port staged injection, and direct spark The G5 Voodoo processing units are the perfect choice for professional level motorsport. For more information please see the Features and Specifications tab or view our Product Introduction page here. The G5 Voodoo Neo 4 works on a variety of vehicles, please contact a LinkECU Reseller or Technical Support for advice regarding your specific project.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eG5 Voodoo Neo 4 ECUUSB-C Connection Cable\u003c\/li\u003e\n\u003cli\u003eWi\u003c\/li\u003e\n\u003cli\u003eFi Antenna4m GPS Antenna (Magnetic or Adhesive Mount) USB-C and SMA Dust Covers Quick Start Guide (A5) Installer I\/O table (A3) Link stickers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAs a genuine Link Engine Management product, this ECU is stocked and supplied by AutoCentre Parts New Zealand, giving Kiwi builders and tuners access to Link's full engine management ecosystem. AutoCentre Parts stocks the wider Link ECU range - from ECUs and plug-in solutions through to looms, sensors, dashes and CAN accessories - so you can source everything your engine build needs from one trusted New Zealand supplier. Pair this ECU with the appropriate loom, sensors and a qualified tuner to get the most from your engine build, and reach out to our team if you need help selecting compatible parts for your project. All Link ECU products sold through AutoCentre Parts are genuine, warranted items backed by local support and fast New Zealand-wide shipping.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649862728,"sku":"ACP-01394","price":4552.81,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/154-5000.0.jpg?v=1790043486"},{"product_id":"g5-voodoo-pro-2","title":"G5 Voodoo Pro","description":"\u003cp\u003eG5 Voodoo Pro puts real magic in your hands and opens a new world of possibilities with the ability to control port plus direct injection, more injector and ignition drives, advanced communications and many more features. With 12 Injection, 8 Ignition and 4 multi-purpose (inj, ign, aux) drives (24 total) the G5 Voodoo Pro can run up to:· 12 cylinders port or direct injection and direct spark, or· 8 cylinders with direct\/port staged injection and direct spark. The supported cylinder count depends on the type and number of fuel pumps used. For more information please see the Features and Specifications tab or view our Product Introduction page here. The G5 Voodoo Pro works on a variety of vehicles, please contact a LinkECU Reseller or Technical Support for advice regarding your specific project. Click here to head to the Knowledge Base for more technical information (includes downloads for the Quick Start Guide and I\/O table).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e· G5 Voodoo Pro ECU· USB-C Connection Cable· Wi-Fi Antenna· 4m GPS Antenna (Magnetic or Adhesive Mount)· USB-C and SMA Dust Covers· Quick Start Guide (A5)· Installer I\/O table (A3)· Mounting Screws· Link stickers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAs a genuine Link Engine Management product, this ECU is stocked and supplied by AutoCentre Parts New Zealand, giving Kiwi builders and tuners access to Link's full engine management ecosystem. AutoCentre Parts stocks the wider Link ECU range - from ECUs and plug-in solutions through to looms, sensors, dashes and CAN accessories - so you can source everything your engine build needs from one trusted New Zealand supplier. Pair this ECU with the appropriate loom, sensors and a qualified tuner to get the most from your engine build, and reach out to our team if you need help selecting compatible parts for your project. All Link ECU products sold through AutoCentre Parts are genuine, warranted items backed by local support and fast New Zealand-wide shipping.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649895496,"sku":"ACP-01393","price":5838.44,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/153-5000.1.jpg?v=1790043488"},{"product_id":"ttx","title":"TTLink - TTX","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to maximize the potential from your car. This ECU fits in the factory OEM location. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. The Link G4X ECU TT Link TTX PlugIn Designed for the VWAG PQ34 1.8l Turbo enginewith E-Throttle. This ECU works with manual transmissions only. Includes an onboard 4 bar or 7 bar MAP sensor. Most factory features are supported. Check the features tab for I\/O expansion options This PlugIn ECU is not compatible with the CANJST cables. To connect to the CAN use CANLTW (PN 101-0211) or CANF (PN 101-0020) Suitable applications: Engine must be 1.8TECU header must have two connectors, 121 pin total Must be Drive by Wire (E-throttle) Must be manual transmissionFWD or 4WD (Haldex) The following vehicles are known to be compatible: Make Model Years Engine code AudiTT99-02AJQVW Beetle2005AWUVW Passat2000 VW Golf2001AUM The following vehicles are likely to be compatible with the ECU, but are untested: Make Model Years Engine code AudiA398-00AJQ A399-00APP A399-01ARZ A300-05ARX A300-05ARY A300-05AUM A300-05AUQ A498-00APU A400-02AVJ A400-02AWT A402-03BEX A404-07BFB A698-00APU A600-02AWT S398-01APY S300-05BAM S302-03AMK TT98-00APX TT99-00APP TT99-02AJQ TT00-02AMU TT00-05ARX TT00-05ARY TT00-05AUM TT00-05AUQ TT00-05BAM TT00-06AWP TT05-06BFV TT05-06BVP TT05-06BVR Seat Alhambra00-04AWC Ibiza99-00AQX Ibiza00-01AYP Ibiza04-08BJX Ibiza05-08BBU Leon98-00AJQ Leon99-00APP Leon00-01AJQ Leon00-05ARY Leon00-05AUQ Leon00-05BAM Leon02-03AMK Skoda Octavia99-01ARZ Octavia00-05ARX Octavia00-05ARY Octavia00-05AUM Octavia00-05AUQ VW Bora00-05ARX Bora00-05ARY Bora00-05AUM Bora00-05AUQ Bora02-06AWP Golf99-01ARZ Golf00-05ARX Golf00-05ARY Golf00-05AUM Golf00-05AUQ Golf02AWP Golf02-06AWP Jetta01-09AWP New Beetle99-00APH New Beetle99-00AVC New Beetle02-04AWP Passat98-00APU Passat00-02AWT Polo04-08BJX Polo05AWP Polo05-08BBU Sharan00-04AWC Vehicles with the following engine codes are known not to be compatible: AEB, AGU, AJH, AJL\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649928264,"sku":"ACP-01392","price":2576.56,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/208-4000.1.jpg?v=1790043489"},{"product_id":"e36x","title":"BMWLink - E36X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. This ECU is designed for the E36 M50TUB25 engine. Please check your connector matches the header in the listed photo before purchasing. This ECU only works with the Engine Code M50TUB25 (Bosch ECU from factory). Works with manual \u0026amp; automatic transmissions. Built in 4 Bar MAP sensor or 7 Bar MAP sensor included. Most factory features are supported. Check the features tab for I\/O expansion options . This ECU will need a modification before E-Throttle is usable. Suitable applications: M50TUB25 engine with the Bosch M3.3.1 ECU from factory\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649961032,"sku":"ACP-01391","price":2332.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/201-4000.1.jpg?v=1790043490"},{"product_id":"hvlcplus","title":"G4X VLLink - HVLC","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the model listed below. This ECU is designed for the RB30ET engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Includes onboard 4 bar MAP sensor or 7 Bar MAP sensor. Most factory features are supported. Check the features tab for I\/O expansion options.6 ignition outputs available to allow direct spark conversion. This ECU will need a modification before E-Throttle is usable. Suitable applications: Holden VL RB30ET. *Note the connector for this ECU is now obsolete, we need your original ECU to salvage the connector off to be able to manufacture the new ECU. For this reason they generally aren't kept in stock - Made to order with short lead time. *Other models such as the RB30E, R31 Skyline, RB20E, L20E and L20ET may be supported too. Check with Sales or Tech Support before purchasing.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373649993800,"sku":"ACP-01390","price":2629.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/HVLC.0.jpg?v=1790043492"},{"product_id":"hc20x","title":"CIVICLink - K20X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the K20A engine. · Please check your connector matches the header in the listed photo before purchasing. · This ECU works for manual transmissions only. · ECU includes an onboard 7 bar MAP sensor.· Most factory features are supported.· Check the features tab for I\/O input \u0026amp; output expansion options Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Code 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous. Suitable applications (Manual Transmission only) for 237-4000 automotive computer unit: Honda Integra Type R DC5 2002-2004 with K20A\/K20A2\/K20A3 Engine Acura RSX 2002-2004 with K20A\/K20A2\/K20A3 Engine Honda Civic Type R EP3 2001-2005 with K20A Engine Honda Civic Si\/SiR 2001-2005 with K20A3 Honda Civic DX\/LX\/HX 2001-2005 with D17A1\/A2\/A3 Engine Honda CR-V 2002-2004 with K24A1 Engine\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650026568,"sku":"ACP-01389","price":2332.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/237-4000.1.jpg?v=1790043494"},{"product_id":"s2000","title":"S2000Link - S2000X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the Honda S2000 AP1. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. This ECU doesn't support factory E-Throttle Models Most factory features are supported. Check the features tab for I\/O input \u0026amp; output expansion options Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Code 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous. Suitable applications for 233-4000 automotive computer unit: Honda S2000 AP1 1999-2004 Honda S2000 AP2 2005 (Non E-throttle)\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650059336,"sku":"ACP-01388","price":2629.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/233-4000.1.jpg?v=1790043494"},{"product_id":"hc96x","title":"CIVICLink - HC96X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the 1996-1998 Honda B16 and B18 engine. All models that use the Honda “OBD2A” ECU. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Onboard MAP sensor not included Most factory features are supported. Check the features tab for I\/O input \u0026amp; output expansion options. This ECU will need a modification before E-Throttle is usable. Suitable applications for 206-4000 Automotive Computer unit: ACURA: 98-99 CL \u0026amp; 00-01 Integra LS\/GS\/GS-R\/Type-R HONDA: 98-02 Accord DX\/LX\/EX 99-00 Civic DX\/LX\/EX\/Si\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650092104,"sku":"ACP-01387","price":1960.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/206-4000.1.jpg?v=1790043496"},{"product_id":"hc92x_3","title":"CIVICLink - HC92X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the data processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the 1992-1995 Honda B16 and B18 engine. All models that use the Honda “OBD1” ECU. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. No onboard MAP sensor. Knock control is not available on this ECU. Most factory features are supported. Check the features tab for I\/O input \u0026amp; output expansion options. This ECU will need a modification before E-Throttle is usable. Suitable Applications for 205-4000 automotive control unit:1992-1995 Gen 5 Honda Civic DX\/LX\/EX\/Si ACURA: 92-95 Integra RS\/LS\/GS\/GS-R HONDA: 90-95 Accord DX\/LX\/EX 93-95 Del Sol S\/Si, 94-95 Del Sol VTEC 90-91 Prelude Si \u0026amp; 92-95 Prelude S\/SE\/Si\/VTEC The following expansion connector inputs\/outputs are provided: Gnd Sensor Ground Only +5V Out Low Current +5V Supply An Volt 4 Analog 0-5V input An Volt 5 Analog 0-5V input An Volt 6 Analog 0-5V input Aux 8 Auxiliary output (0.5A current MAX) DI 6 Digital Input An Temp 3 Temperature sensor input\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650124872,"sku":"ACP-01386","price":1960.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/205-4000.1.jpg?v=1790043497"},{"product_id":"mx5nb1x","title":"MX5Link - MX5NB1X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the Pre-Facelift MX5 NB (MY1998-2000, 3 Plug ECU, non-VVT 1.8L Engine) Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Includes onboard 7 bar MAP sensor Most factory features are supported Check the features tab for I\/O expansion options Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650157640,"sku":"ACP-01385","price":2332.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/240-4000.0.jpg?v=1790043498"},{"product_id":"mx5nb2x","title":"MX5Link - MX5NB2X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the Facelift MX5 NB (MY2001-2005, VVT Naturally Aspirated Engines and non-VVT Mazdaspeed Turbo 1.8L) Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Includes onboard 7 bar MAP sensor Most factory features are supported Check the features tab for I\/O expansion options Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650190408,"sku":"ACP-01384","price":2332.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/239-4000.0.jpg?v=1790043501"},{"product_id":"rx7s7x_2","title":"RX7Link (S7) - RX7S7X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the RX7 series 7-8 13BT. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Check the features tab for I\/O expansion options. Suitable applications: FD3S Series 7 RX7 FD3S Series 8 RX7 This ECU will support naturally aspirated, parallel twin or single turbo configurations. Does not support sequential control of the stock twin turbos.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650223176,"sku":"ACP-01383","price":2332.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/219-4000.1.jpg?v=1790043504"},{"product_id":"rx7s6x_2","title":"RX7Link (S6) - RX7S6X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. This ECU is designed for the RX7 series 6 13BT. Please check your pinout connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Check the features tab for I\/O expansion options. This ECU will need a modification before E-Throttle is usable. Suitable applications: FD3S Series 6 RX7 This ECU will support naturally aspirated, parallel twin or single turbo configurations. Does not support sequential control of the stock twin turbos.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650255944,"sku":"ACP-01382","price":2332.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/218-4000.1.jpg?v=1790043503"},{"product_id":"mx5x_2","title":"MX5Link - MX5NAX","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the MX5 B6ZE (RS) \/ BP 1.8L engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Includes onboard 4 bar or 7 bar MAP sensor Knock control not available on this ECU. Most factory features are supported. Check the features tab for I\/O expansion options. This ECU will need a modification before E-Throttle is usable. Suitable applications: 1600 1989-1997 NA MX5 1800 1989-1997 NA MX5 1800 323 GTX 1800 323 GTR Please note: This ECU does not fit NB, NC, ND models. This unit is only suitable for the 2 plug ECU and not the later 3 plug models).\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650288712,"sku":"ACP-01381","price":1960.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/212-4000.1.jpg?v=1790043505"},{"product_id":"minix","title":"MiniLink - MINIX","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. Our BMW Mini ECU comes in its own case which fits directly into the factory location. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. The MINIX Automotive Computer Unit is designed for the R50-R53 Tritec 1.6 SC engine. Please check your pinoutconnector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. An XS Loom and 4 Bar Map Sensor highly recommended (sold separately). Most factory features are supported. Check the features tab for I\/O expansion options Suitable applications: R50 –R53 MINI Hatch with the 1.6l SC engine Chronopack dash option not currently supported\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650321480,"sku":"ACP-01380","price":2576.56,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/209-4000.1.jpg?v=1790043506"},{"product_id":"evo9x_2","title":"EVOLink - EVO9X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. This ECU is designed for the EVO 9 4G63 engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Includes onboard 7 bar MAP sensor Most factory features are supported Check the features tab for I\/O input \u0026amp; output expansion options Suitable Applications for 204-4000 Automotive Computer Unit: CT9A Lancer Evolution 9, 2005-2007 CT9A Lancer Evolution 8, 2003-2005 with 3 plug ECU ONLY Any EVO8 car with a 3 plug ECU will also require this ECU.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650354248,"sku":"ACP-01379","price":2916.56,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/204-4000.1.jpg?v=1790043509"},{"product_id":"evo8x_2","title":"EVOLink (IV-VIII) - EVO8X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. This ECU is designed for the EVO 4-8 4G63 engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Includes onboard 4 bar or 7 bar MAP sensor Most factory features are supported. Check the features tab for I\/O input \u0026amp; output expansion options Suitable applications for 203-4000 automotive computer unit: CN9A Lancer Evolution 4 CP9A Lancer Evolution 5, 6 \u0026amp; 6.5 (TME) CT9A Lancer Evolution 7 CT9A Lancer Evolution 8 (models with 4-plug ECU only) *Some EVO 8’s have a 3 plug ECU. These applications will need the EVO9X Link ECU\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650387016,"sku":"ACP-01378","price":2916.56,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/203-4000.1.jpg?v=1790043510"},{"product_id":"vr4x_2","title":"VR4Link - VR4X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. This ECU is designed for the Vr4 4G63T engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Includes onboard 4 bar or 7 bar MAP sensor. Knock control not available on this ECU. Most factory features are supported. Check the features tab for I\/O expansion options of the input and output units. This ECU will need a modification before E-Throttle is usable. Suitable Applications of 223-4000 - Automotive Computer Unit: Mitsubishi Galant VR-4 E38A (1987-1992) with 4G63T engine Mitsubishi Galant VR-4 E39A (1987-1992) with 4G63T engine 1G DSM with 4G63T engine\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650419784,"sku":"ACP-01377","price":1960.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/223-4000.1.jpg?v=1790043511"},{"product_id":"evo3x_2","title":"EVOLink (I-III) - EVO3X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. This ECU is designed for the EVO 1-3 4G63 engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Includes onboard 4 bar MAP sensor Air temp sensor highly recommended. Most factory features are supported. Check the features tab for I\/O expansion options of the input and output unit This ECU will need a modification before E-Throttle is usable. Suitable applications for 202-4000 Automotive Computer Unit: Mitsubishi EVO 1 1992-1994*Mitsubishi EVO 2 1994-1995* Mitsubishi EVO 3 1995-1996**Chassis number for these cars should be CD9A or CE9A. Mitsubishi GSR 1.8L 4G62\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650452552,"sku":"ACP-01376","price":1960.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/202-4000.1.jpg?v=1790043512"},{"product_id":"n300x_2","title":"300ZLink - N300X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. The N300X ECU is Designed to suit the VG30DET engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Includes an onboard 4 bar or 7 bar MAP sensor. Most factory features are supported. It is highly recommended to fit an IAT sensor with this model. Check the features tab for I\/O expansion options. This ECU will need a modification before E-Throttle is usable. Suitable applications: Z32 300ZX VG30DE Z32 300ZX VG30DETT\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650485320,"sku":"ACP-01375","price":2629.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/213-4000.1.jpg?v=1790043514"},{"product_id":"ns13x_2","title":"S13Link - NS13X - 76 pin","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the SR20 and CA18 engines, that use the 76 pin Blue ECU Header. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. It includes an onboard 4 bar or 7 bar MAP sensor. Most factory features are supported. Check the features tab for I\/O expansion options. This ECU will need a modification before E-Throttle is usable. Suitable applications: Nissan S13 CA18DET Nissan 180SX CA18DET Nissan S14 (pre facelift) SR20DET\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650518088,"sku":"ACP-01374","price":2810.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/216-4000.1.jpg?v=1790043515"},{"product_id":"ns15_et","title":"S15Link - NS15X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the SR20 engine. This ECU will work with the 64 pin, blue header plug ECU version. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. ECU includes an onboard 7 bar MAP sensor. Most factory features are supported. Check the features tab for I\/O expansion options. This ECU now includes E-Throttle as standard. Now with 4 pin powered CAN connector (See note below). Suitable Applications: S13 Silvia \/ 180SX SR20DET (but not CA18DET) S14a Silvia (facelift) SR20DET S15 Silvia SR20DET S15 Silvia SR20DE RNN14 Pulsar GTI-R SR20DET N15 Pulsar SR16VE N14 Distributed *For the 76 pin header ECU, have a look at the S13X PlugIn listing. Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Code 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650550856,"sku":"ACP-01373","price":2916.56,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/217-4100.1.jpg?v=1790043516"},{"product_id":"ngttx_2","title":"GTTLink - NGTTX","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. The NGTTX is Designed to suit the grey plug RB (typically neo) engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Most factory features are supported. Note: This ECU does not currently output the 4WD signal required for proper 4wd operation in 4WD Stageas and Skylines. Note: Models fitted with factory traction control - TCS will no longer function, the TCS and slip lamps will be illuminated. Check the features tab for I\/O expansion options. This ECU will need a modification before E-Throttle is usable. Suitable applications: RB20DE NEO, RB25DE NEO and RB25DET NEO in R34 SkylinesRB20DE NEO, RB25DE NEO and RB25DET NEO in C35 Laurels RB20DE NEO, RB25DE NEO and RB25DET NEO in Nissan Stageas- Plus, non neo motors in Stageas\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650583624,"sku":"ACP-01372","price":2810.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/215-4000.1.jpg?v=1790043519"},{"product_id":"g4x_gtr_bundle","title":"GTRLink - NGTRX Bundle","description":"\u003cp\u003eThe perfect package to upgrade your Nissan GTR. The G4X NGTRX ECU is a direct replacement for your factory ECU. Combined with the XS Loom, CANJST4 and CAN LAMBDA this is a simple and cost-effective solution for improving the performance and expanding the capabilities of your car. The NGTRX is Designed to suit the blue plug Nissan RB engine. Please check the Nissan GTRX ECU listing for more detail and to ensure this is the correct ECU for your car. NGTRX Plug-in ECU with E-Throttle - all the features of a Link G4X XtremeX ECU, but in plug-in form that fits into the OEM ECU enclosure. XS Loom - allows for additional inputs\/outputs for your plug-in ECU. Can Lambda - an easy to use CAN module that provides digital wideband sensor control via CAN bus. CANJST4 – Cable for G4X Plug-in ECUs, provides CAN communications and a protected 12V supply for powering and communicating with accessories such as the CAN Lambda, Dash, or EGT amplifier\u003c\/p\u003e\u003cp\u003eBecause every component in the bundle is chosen by Link Engine Management to work together, you avoid the risk of accidentally pairing an ECU with an incompatible loom or sensor. This bundle is put together by Link Engine Management to take the guesswork out of parts selection, and is supplied through AutoCentre Parts New Zealand as a genuine, complete package. Buying the ECU, loom and sensors together in one bundle typically works out more cost-effective than sourcing each part separately, and ensures everything you need to begin wiring is included from day one. Our team can talk you through the bundle contents and confirm it is the right fit for your engine and vehicle before you order.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650616392,"sku":"ACP-01371","price":3660.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/214-9800B.0.jpg?v=1790043520"},{"product_id":"ngtrx_et","title":"GTRLink - NGTRX","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. The NGTRX is Designed to suit the blue plug Nissan RB engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. This model includes an onboard 4 bar or 7 bar MAP sensor. Most factory features are supported. This ECU includes support for E-Throttle (Drive-by-Wire) Now with 4 pin powered CAN connector (See note below). Suitable applications for 214-4100 automotive computer unit: RB26DETT engines found in R32, R33, R34 Skyline GTRs and Autech 260RS Stageas RB20DE engines found in R32 \u0026amp; R33 Skylines, A31 Cefiros RB20DET engines found in R32 Skylines (incl 4wd), A31 Cefiros and C33 Laurels. – Injector 4\u0026amp;6 need swapping RB25DE engines found in R32 \u0026amp; R33 Skylines, C33 \u0026amp; C34 Laurels and A31 Cefiros. RB25DET engines found in R33 Skylines (incl 4wd) and C34 Laurels RB30DE\/DET\/DETT engines made using Non Neo heads and blue plug looms Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Code 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650649160,"sku":"ACP-01370","price":2916.56,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/214-4100.0.jpg?v=1790043519"},{"product_id":"n350x_2","title":"350ZLink - N350X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU comes in its own enclosure, while installation is a breeze with no alteration of the factory wiring loom required for the models listed below. The N350X ECU is Designed to suit the VQ35DE engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works with manual AND automatic transmissions. ECU includes an onboard 4 bar or 7 bar MAP sensor. Most factory features are supported. Check the features tab for I\/O expansion options Highly recommended to fit an IAT sensor. Suitable applications: 2002 to 2006 Nissan 350Z (Fairlady Z Z33) 2003 to 2006 Nissan Skyline V35 2003 to 2006 Infinity G35\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650681928,"sku":"ACP-01369","price":2629.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/210-4000.1.jpg?v=1790043521"},{"product_id":"tb48","title":"TB48Link - G5 TB48","description":"\u003cp\u003eEasy to install. Affordable. Reliable. The TB48 G5 Plug-In ECU is a standalone plug and play replacement for the factory ECU and plugs straight into the original wiring loom, no adapter harness needed and comes with a sample map for a tuning head start. The TB48 G5 Plug-In processing unit runs the same powerful microcontroller and firmware as the G5 Voodoo Neo. Designed for all post-2016 Nissan Patrol Y61 models with the TB48 engine. Support for both Manual and Automatic Transmissions. Fitment Notice: This ECU is designed for post-2016 Y61 Nissan Patrol models with a 3-plug header, primarily supplied to the Middle East. Before purchasing, contact LinkECU Sales or Technical Support to ensure fitment. For more technical information please see the Features and Specifications tabs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e· TB48 G5 Plug-in ECU · USB-C Connection Cable · Wi-Fi Antenna · 4m GPS Antenna (Magnetic or Adhesive Mount) · USB-C and SMA Dust Covers · Link stickers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650714696,"sku":"ACP-01368","price":4552.81,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/246-5000.0.jpg?v=1790043524"},{"product_id":"wrx11x-usdm","title":"USDM WRXLink V11 - USDM WRX11X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. Due to the amount of variation on this vehicle, please ensure you read the Configuration - Memo Text in PC Link. This product supports the following North American (USDM) models:2011-2014 WRX STI hatch or sedan, GR\/GV chassis code, manual transmission only. (note 2010 and earlier models used a different pinout which is supported by our WRX11 ecu - see model list link below).2015-2021 WRX STI VA chassis code, must have EJ series engine, manual transmission only. (FA20 engine not supported). Take a look at our supported models list to find out which models are supported and technical information on how to check if a model is supported. Alternatively, contact your LinkECU Reseller or our 24\/6 Tech Support Team. Important Notes Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Air temp sensor highly recommended. Most factory features are supported including DCCD, hill start assist, SI drive, cruise control, cam control \u0026amp; ABS supported. Check the features tab for I\/O input \u0026amp; output expansion options. Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650747464,"sku":"ACP-01367","price":2916.56,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/243-4000.0.jpg?v=1790043525"},{"product_id":"gt86-lhd","title":"G5 ECU Plug-In - GT86\/Subaru BRZ\/Scion FR-S - LHD","description":"\u003cp\u003eThe GT86 G5 Plug-in is a standalone plug and play replacement for the factory ECU and plugs straight into the original wiring loom, no adapter harness needed and comes with a sample map for a tuning head start. The GT86 G5 Plug-in runs the same powerful microcontroller and firmware as the G5 Voodoo Pro. Designed for the 2.0 L 4U-GSE\/FA20 H4 Engine. Support for both Manual and Automatic Transmissions. Models Supported: Toyota 86, ZN6, 2012 – 2021 Toyota GT86, ZN6, 2012-2021 Subaru BRZ, ZC6, 2012-2020 Scion FR-S 2013-2016 For more technical information please see the Features and Specifications tabs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eG5-GT86 Plugin ECUUSB-C Connection Cable Locking USB-C extension cable for easy tuning access2 x M6 screws for ECU mounting in OEM bracket\u003c\/li\u003e\n\u003cli\u003eDTM4 CAN Connection Cable (Pre-Installed in Enclosure) Notes: Due to the very tight nature of the factory ECU location, the LHD and RHD mounting methods differ. This is for left-hand drive LHD vehicles. A RHD Version is available under part number 241-40002017+ Models have some differences to earlier cars and will not run with the sample maps supplied in PC Link and the standard plug-in ecu hardware.2017+ Engines have a Hall Effect Crank Sensor instead of Reluctor and so require the Trigger 1 Type changed from 'Reluctor' to 'Optical\/Hall' and the Trigger 1 Pull-up set to ON.2017+ Engines have a different DI Fuel Pressure sensor than earlier models, this sensor has 4 pins instead of 3 and requires an 8.2kohm pullup resistor to be wired between C7 (An Volt 4) and 5v, the DI Fuel Pressure Source changed from An Volt 3 to An Volt 4 and the pressure calibration changed to 0k\u003c\/li\u003e\n\u003cli\u003ePa at 4.06\u003c\/li\u003e\n\u003cli\u003eV and 30000k\u003c\/li\u003e\n\u003cli\u003ePa at 0.46\u003c\/li\u003e\n\u003cli\u003eV.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650780232,"sku":"ACP-01366","price":3500.94,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/241-4200.1.jpg?v=1790043527"},{"product_id":"gt86-rhd","title":"Toyota GT86\/Subaru BRZ G5 ECU Plug-In \/ RHD","description":"\u003cp\u003eThe GT86 G5 Plug-in is a standalone plug and play replacement for the factory ECU and plugs straight into the original wiring loom, no adapter harness needed and comes with a sample map for a tuning head start. The GT86 G5 Plug-in processing unit runs the same powerful microcontroller and firmware as the G5 Voodoo Pro. Designed for the 2.0 L 4U-GSE\/FA20 H4 Engine Right-Hand Drive cars. Support for both Manual and Automatic Transmissions. Models Supported by 241-4000 Automotive computer unit: Toyota 86, ZN6, 2012 – 2021 Toyota GT86, ZN6, 2012-2021 Subaru BRZ, ZC6, 2012-2020 For more technical information please see the Features and Specifications tabs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eG5-GT86 Plugin ECUUSB-C Connection Cable Locking USB-C extension cable for easy tuning access2 x M6 screws for ECU mounting in OEM bracket\u003c\/li\u003e\n\u003cli\u003eDTM4 CAN Connection Cable (Pre-Installed in Enclosure) Notes: Due to the very tight nature of the factory ECU location, the LHD and RHD mounting methods differ. This is for right-hand drive RHD vehicles. A LHD Version is available under part number 241-42002017+ Models have some differences to earlier cars and will not run with the sample maps supplied in PC Link and the standard plug-in ecu hardware.2017+ Engines have a Hall Effect Crank Sensor instead of Reluctor and so require the Trigger 1 Type changed from 'Reluctor' to 'Optical\/Hall' and the Trigger 1 Pull-up set to ON.2017+ Engines have a different DI Fuel Pressure sensor than earlier models, this sensor has 4 pins instead of 3 and requires an 8.2kohm pullup resistor to be wired between C7 (An Volt 4) and 5v, the DI Fuel Pressure Source changed from An Volt 3 to An Volt 4 and the pressure calibration changed to 0k\u003c\/li\u003e\n\u003cli\u003ePa at 4.06\u003c\/li\u003e\n\u003cli\u003eV and 30000k\u003c\/li\u003e\n\u003cli\u003ePa at 0.46\u003c\/li\u003e\n\u003cli\u003eV.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650813000,"sku":"ACP-01365","price":3500.94,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/241-4000.0.jpg?v=1790043527"},{"product_id":"wrx11x","title":"WRXLink V11 - WRX11X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. Due to the amount of variation on this vehicle, please ensure you read the Configuration - Memo Text in PC Link. This product supports the following models:2007-2014 WRX and WRX STI with GR\/GV\/GH\/GE chassis codes, for JDM\/AUDM\/SADM\/EURO markets, with turbocharged EJ20 or EJ25 engines.2008-2010 USDM models which have the common international Denso ECU Pinout**2015-2021 WRX STI with VAB\/VAF chassis codes, for JDM\/AUDM\/SADM\/EURO markets, with turbocharged EJ20 or EJ25 engines**Note: Refer to the supported models document below for more detail. 2011 and later USDM models are supported by our WRX11 USDM ECU Take a look at our supported models list to find out which models are supported and which are not. Alternatively, contact your LinkECU Reseller or our 24\/6 Tech Support Team. Important Notes Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Air temp sensor highly recommended. Most factory features are supported including DCCD, hill start assist, SI drive, cruise control, cam control \u0026amp; ABS supported. Check the features tab for I\/O input \u0026amp; output expansion options. The security\/immobiliser lamp may remain illuminated in some models Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650845768,"sku":"ACP-01364","price":2916.56,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/238-4000.0.jpg?v=1790043528"},{"product_id":"wrx9x_2","title":"WRXLink (7-9) - WRX9X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the WRX V7-9 EJ20 (GD\/GG chassis, MY2000-2007 with cam control, 2.0L models only). Please check your connector matches the header in the listed photo before purchasing. This ECU fits 5 Plug ECUs. This ECU works for manual transmissions only. Air temp sensor highly recommended. Most factory features are supported. Check the features tab for I\/O input \u0026amp; output expansion options.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650878536,"sku":"ACP-01363","price":2810.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/229-4000.1.jpg?v=1790043531"},{"product_id":"wrx6x_2","title":"WRXLink - WRX6X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the WRX V5-6 EJ20. Please check your pinout matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Air temp sensor highly recommended. Most factory features are supported. Check the features tab for I\/O input \u0026amp; output expansion options Note: V1.4 onwards of this Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Code 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provides not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous. Suitable Applications for 228-4000 automotive computer unit: GC8F GC8G WRX and STI from 09\/1998 to 08\/00 MY99 \u0026amp; MY00\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650911304,"sku":"ACP-01362","price":2332.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/228-4000.1.jpg?v=1790043531"},{"product_id":"wrx4x_2","title":"WRXLink (3-4) - WRX4X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the WRX V3-4 EJ20 Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Air temp sensor highly recommended. Most factory features are supported. Check the features tab for I\/O input \u0026amp; output expansion options. This ECU will need a modification before E-Throttle is usable. Suitable Applications for 227-4000 automotive computer unit: GC8D GC8E WRX and STI from 09\/1996 to 08\/1998\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650944072,"sku":"ACP-01361","price":1960.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/227-4000.1.jpg?v=1790043532"},{"product_id":"wrx2x_2","title":"WRXLink - WRX2X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation of the processing unit is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the WRX V1-2 EJ20. Please check your pinoutconnector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. Air temp sensor highly recommended. Most factory features are supported. Check the features tab for I\/O input \u0026amp; output expansion options. This ECU will need a modification before E-Throttle is usable. Suitable Applications for 226-4000 Automotive Computer Unit: GC8A GC8B GC8C WRX and STI from 10\/1992 to 8\/1996\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373650976840,"sku":"ACP-01360","price":1960.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/226-4000.1.jpg?v=1790043534"},{"product_id":"wrx107x_2","title":"WRXLink (V10) - WRX107X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. The Link G4X PlugIn ECU transforms your WRX into a precision-tuned performance machine. Enjoy the latest in engine management technology, fitted directly into your OEM enclosure with no loom modifications required. Choose the Right Model – Pin Check Required! The fastest and most reliable way to determine which ECU you need is to check pins A1–A3 on the OEM connector: If pins A1–A3 have wires → You need the WRX104X. If pins A1–A3 are empty → You need the WRX107X (this listing, 225-4000) Some late 2006 cars require the WRX107X, so this check is essential. Vehicle Compatibility Designed for WRX V10 EJ25 (2.5L) 2004–2007 Manual transmission only Suits GD\/GG chassis with electronic throttle Not suitable for GR\/GH\/GE\/GV hatchback or 3rd generation WRX Model breakdown: WRX104X → Mostly covers 2004–2006 WRX107X → Covers 2007 and some late 2006 Why Choose Link G4X? Factory fit, motorsport power – fits inside the OEM case, yet offers world-class tuning flexibility. Plug \u0026amp; play install – no wiring loom alterations for supported models. Confidence \u0026amp; reliability – trusted by tuners worldwide. Full feature set – advanced boost control, antilag, launch, knock protection \u0026amp; more.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373651009608,"sku":"ACP-01359","price":2810.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/225-4000.1_20_281_29.jpg?v=1790043535"},{"product_id":"wrx104x_2","title":"WRXLink (04) - WRX104X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. The Link G4X PlugIn ECU transforms your WRX into a precision-tuned performance machine. Enjoy the latest in engine management technology, fitted directly into your OEM enclosure with no loom modifications required. Choose the Right Model – Pin Check Required! The fastest and most reliable way to confirm you need the WRX104X is to check pins A1–A3 on the OEM connector: Pins A1–A3 have wires → You need the WRX104X (this listing, 224-4000) Pins A1–A3 are empty → You need the WRX107X. WRX104X mostly covers 2004–2006; some late-2006 cars require the WRX107X, so this check is essential. Vehicle Compatibility Designed for WRX V10 EJ25 (2.5L) 2004–2007 Manual transmission only Suits GD\/GG chassis with electronic throttle Not suitable for GR\/GH\/GE\/GV hatchback or 3rd generation WRX Model breakdown: WRX104X → Mostly covers 2004–2006 WRX107X → Mostly covers 2007 and some late 2006 Why Choose Link G4X? Factory fit, motorsport power – installs in the OEM case with world-class tuning flexibility. Plug \u0026amp; play – no wiring loom alterations for supported models. Confidence \u0026amp; reliability – proven hardware and software, trusted by tuners worldwide. Serious features – advanced boost control, antilag, launch, knock control \u0026amp; more.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373651042376,"sku":"ACP-01358","price":2810.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/224-4000.1.jpg?v=1790043538"},{"product_id":"ts2jzx_2","title":"SupraLink - TS2JZX","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the 2JZ non VVTi engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. No onboard MAP sensor. XS Loom \u0026amp; map sensor highly recommended. Most factory features are supported. Check the features tab for I\/O expansion options Suitable applications: Toyota Supra 2JZ non VVTi This ECU will support naturally aspirated, parallel twin or single turbo configurations. Does not support sequential control of the stock twin turbos (note: does not fit case of the NA supra)\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373651075144,"sku":"ACP-01357","price":2735.94,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/211-4000.1.jpg?v=1790043539"},{"product_id":"taltx_2","title":"AltezzaLink - TALTX","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the 3SGE Beams engine. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. ECU includes an onboard 4 bar or 7 bar MAP sensor. Most factory features are supported. Check the features tab for I\/O expansion options Suitable applications: 1998-2001 Toyota Altezza (XE10) Lexus IS200 (GXE10)\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373651107912,"sku":"ACP-01356","price":2332.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/220-4000.1.jpg?v=1790043540"},{"product_id":"tst185x","title":"MR2Link V1 - TST185X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the 3SGTE engine in the models specified below. Please check your connector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. A Link Air Temp Sensor is highly recommended with this ECU Most factory features are supported. Check the features tab for I\/O expansion options. This ECU will need a modification before E-Throttle is usable. Suitable applications: Toyota MR2 (SW20) from 1989 to 1992 Toyota Celica ST185 (except the GT-Four RC\/Carlos Sainz Special Edition which is compatible with the Link TST205X Plugin)\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373651140680,"sku":"ACP-01355","price":2279.06,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/221-4000.1.jpg?v=1790043543"},{"product_id":"tst205x","title":"MR2Link V3 - TST205X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. Designed for the 3SGTE engine in the models specified below. Please check your pinoutconnector matches the header in the listed photo before purchasing. This ECU works for manual transmissions only. ECU does not fit in the original housing of non-turbo cars Most factory features are supported. Check the features tab for I\/O expansion options. This ECU will need a modification before E-Throttle is usable. Suitable applications: Toyota MR2 1993 onwards (Gen3 3SGTE) not including Red Top Beams Celica ST205 Carlos Sainz EditionGT-Four RC Group A Rallye\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373651173448,"sku":"ACP-01354","price":2279.06,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/222-4000.1.jpg?v=1790043543"},{"product_id":"fj100x","title":"FZJ100 Link - TFZJ100X","description":"\u003cp\u003eEasy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. Link’s Toyota 1FZ-FE Plug-In ECU (TFZJ100X) is a direct replacement for the factory ECU in Toyota Land Cruiser fitted with the 1FZ-FE Non-VVTi engine. It provides full control of fuel, ignition, boost, idle, and auxiliary systems, while retaining a clean OEM-style installation that uses the original wiring loom and ECU location. This ECU supports Toyota Land Cruiser FZJ100 models fitted with the 1FZ-FE 6 cylinder engine. Manual transmission models ONLY. There are two types of OEM ECU fitted to these models. One has four plugs on the wiring harness, the other has three. The FZJ100 Link ECU supports both three and four plug models. On models with four plugs on the wiring harness, the plug that has no matching connector on the ECU is to be left disconnected. See the manual for more information. Compatibility Engine: Toyota 1FZ-FE Vehicles: Toyota Land Cruiser FZJ100 Manual transmission only. Notes*This ECU will need a modification before E-Throttle is usable. *The XS Expansion Loom offers the ability to add addittional inputs and outputs to our range of plug-in ECU's. Why Choose Link G4X? Factory fit, motorsport power – fits inside the OEM case, yet offers world-class tuning flexibility. Plug \u0026amp; play install – no wiring loom alterations for supported models. Confidence \u0026amp; reliability – trusted by tuners worldwide. Full feature set – advanced boost control, antilag, launch, knock protection \u0026amp; more.\u003c\/p\u003e\u003cp\u003eThis Plug-In ECU is genuine Link Engine Management equipment, supplied through AutoCentre Parts New Zealand as part of our dedicated Link ECU range. Because it is designed to occupy the factory ECU location and connect to the factory wiring, installation is generally straightforward for a qualified auto electrician or tuner, with no custom loom required. Contact our team if you would like help confirming fitment for your specific vehicle before ordering, or if you need advice on tuning cables, software or a recommended local tuner. AutoCentre Parts stocks the full Link ECU plug-in range alongside sensors, looms and CAN accessories, so you can source everything your project needs in one place.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373651206216,"sku":"ACP-01353","price":2629.69,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/230-4000.1.jpg?v=1790043545"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/collections\/images_6.png?v=1752055903","url":"https:\/\/autocentreparts.co.nz\/collections\/link-ecu.oembed?page=7","provider":"Auto Centre Parts","version":"1.0","type":"link"}