Ford Mondeo V 2015-2016 1.0 EcoBoost Top Quality Zetec Rocam 1.0 Gasoline Auto Cylinder Head Ford Fiesta 8V – OEM 9S5G6049BB

Product Overview: This complete cylinder head assembly is a direct-fit replacement manufactured for the Zetec Rocam 1.0 engine family, the gasoline (petrol) unit used in Ford, Mitsubishi vehicles. It is supplied fully assembled with valve guides, valve seats, valves, springs and, where applicable, the camshaft carrier already installed, so a cracked, warped, valve-damaged or severely worn original head can be replaced without additional machining. Every unit is inspected before packing: the deck face is checked for flatness, valve seats are tested for concentricity and seal, cam journal clearances are measured to specification, and the casting is pressure and vacuum tested to confirm there are no cracks or core flaws.

Key Features: The casting is CNC-machined to original tolerances so that deck flatness, valve seat concentricity and port geometry all meet specification. Valve guides and seats are pre-installed and honed, combustion chamber volumes are matched across cylinders for balanced compression, and the camshaft journals are line-honed for correct bearing clearance. Reinforced material around the valve bridge, injector or spark plug bosses improves thermal durability under sustained load.

Vehicle Compatibility: This assembly is confirmed against the following applications: Ford Mondeo V (2015-2016) 1.0 EcoBoost; Mitsubishi L 200 (Ka_T, Kb_T) (2004-2015) 2.5 DI-D 4WD (KB4T); Mitsubishi L 200 (Ka_T, Kb_T) (2004-2015) 2.5 DiD (KA4T). Because manufacturers often revise part numbers within the same model generation, always confirm the engine code and original reference number on the vehicle or the failed component before ordering.

Specifications: Engine code: Zetec Rocam 1.0; fuel type: gasoline (petrol); material: Cast lron Or Aluminium; condition: new; purpose: replacement or repair; supplied as a complete, fully assembled cylinder head; warranty: 12 months.

OEM / Reference Numbers: OEM / reference numbers: 9S5G6049BB, XS6E6090CE. These references cover the same unit across different production periods and markets. Match the numbers stamped on the original component with the list above to confirm that this assembly is the correct replacement before ordering.

Applications: Typical applications include Mondeo V, L 200 (KA_T, KB_T) using the Zetec Rocam 1.0 engine.

Benefits / Replacement Information: Replacing a failed engine with this prepared assembly restores performance, oil control and fuel economy while avoiding the machining, cleaning and assembly time of a full rebuild.

Installation or Fitment Notes: Installation should be carried out by a qualified technician following the manufacturer's procedure. Clean and check the block deck for flatness, fit a new head gasket and new head bolts where specified, and torque in the correct sequence to the published figures. Replace the timing belt or chain and tensioner as a set, set valve clearances and cam timing, then refill with the correct coolant and oil.