RENAULT SCÉNIC III VAN 2013.01-2016.09 1.6 VVT (81KW,110PS) K7M 1.6L SOHC 8V Gasoline Long Block Engine Assembly 1598cc for Renault Logan Sandero Clio Megane Kangoo – OEM 7701473352

Product Overview: The K7M complete engine assembly listed here is a complete replacement complete engine assembly for gasoline (petrol) engines found in Renault vehicles. Each unit is assembled from quality-checked components and finish-machined on modern CNC equipment, providing a practical solution when the original complete engine assembly has failed, is uneconomical to rebuild or is no longer available from the dealer network. Quality control covers casting integrity, dimensional accuracy of the machined faces, correct bearing clearances and a leak-down check, giving confidence that the unit is installation-ready.

Key Features: The long-block configuration includes the cylinder block, crankshaft, piston and rod assembly, cylinder head, camshaft, timing drive, oil pump and sump, with gaskets and seals fitted where the design requires. Machined surfaces are checked for flatness and concentricity, bearings are sized to standard, and the rotating assembly is balanced for low vibration and long service life.

Vehicle Compatibility: This assembly is confirmed against the following applications: Renault Scénic III Van (2013.01-2016.09) 1.6 VVT (81KW,110PS); Renault Kangoo Rapid (2008.02-) 1.6 16V FLEX (78KW,106PS); Renault Megane III Hatchback (2009.05-2015.08) 1.6 16V BiFuel (81KW,110PS); Renault Megane I Kombi Van (2001.04-2003.07) 1.6 BiFuel (80KW,109PS); Renault Megane I Kombi Van (2001.04-2003.07) 1.6 (79KW,107PS); Renault Megane I Kombi Van (2001.04-2003.07) 1.4 (70KW,95PS); and further market variants of the same models. Because manufacturers often revise part numbers within the same model generation, always confirm the engine code and original reference number on the vehicle or the failed component before ordering.

Specifications: Engine code: K7M; configuration: Inline-4 cylinder; displacement: 1.6L, 1.6L; fuel type: gasoline (petrol); power output: 60-66 kW; torque: 124-137 Nm; material: Aluminum Alloy Cylinder Head / Cast Iron Block; condition: new; purpose: replacement or repair; supplied as a fully assembled long block that reuses the original ancillaries; warranty: 12 months.

OEM / Reference Numbers: Interchangeable reference numbers include 7701473352. Always compare these against the original part number on the vehicle, as supersession chains differ between regions.

Applications: Typical applications include Renault using the K7M engine.

Benefits / Replacement Information: Fitting this complete engine assembly resolves the low compression, heavy oil use, overheating or mechanical noise associated with a worn or damaged engine. It removes the need for specialist machining and balancing, shortens vehicle downtime and gives a predictable, warrantied result.

Installation or Fitment Notes: A competent technician should install this unit according to the factory service instructions. Use new gaskets, seals, bolts and filters, replace the timing drive where specified, and fill with the correct specification oils and coolant. Prime the oil system, verify timing and clearances, then carry out a road test and re-torque as required.