{"product_id":"canjst4","title":"CANJST4 - CAN Connection Cable for Plugin ECU's (4pin)","description":"\u003cp\u003eDetails Required to add CAN communications \u0026amp; power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older 5pin CAN connector). Plugs directly into the socket on the ECU PCB, provides CAN and a protected 12V supply to allow easy connection of CAN accessories. Suitable for powering a CAN Lambda, Dash, EGT amplifier or other similar low powered CAN devices which have a total continuous current draw of \u0026lt;3A. Compatible Plug Ins:214-4100 - PlugIn ECU G4X Nissan GTR with E-Throttle 217-4100 - PlugIn ECU G4X Nissan S15 with E-Throttle 233-4000 - PlugIn ECU G4X Honda S2000 AP1 228-4000 - PlugIn ECU G4X Subaru WRX V5-6 237-4000 - PlugIn ECU G4X Honda HC20X Type-R DC5\/RSX 238-4000 - Plugin ECU G4X Subaru WRX11 239-4000 - Plugin ECU G4X MX5NB2X 240-4000 - Plugin ECU G4X MX5NB1X 243-4000 - Plugin ECU G4X WRX11 USDM 241-4200 - G5 ECU Plug-In - Toyota GT86\/Subaru BRZ LHD241-4000 - G5 ECU Plug-In - Toyota GT86\/Subaru BRZ RHD SpecsDTM4 Male to JST4. 12V and GND Terminated to JST4. Length 300mm DTM4 Pin Out Pin 4: CAN H Pin 3: CAN L Pin 2: Ground Pin 1: 12V\u003c\/p\u003e\u003cp\u003eGenuine Link connectors, pins and terminals are matched to the exact connector types used on Link ECUs and looms, helping ensure a secure, weatherproof connection. Using the correct crimp tool and terminal for each pin size and wire gauge is important for a reliable, long-lasting connection in the engine bay. Keeping a few spare connectors, pins and blanking plugs on hand makes it much easier to modify or extend a loom later without having to source parts mid-installation. This wiring or connector item is genuine Link Engine Management stock, supplied by AutoCentre Parts New Zealand to support clean, reliable installations of Link ECUs, sensors and accessories. Using the correct genuine connectors and terminals helps avoid poor connections and wiring faults down the line, so we recommend sourcing these alongside your other Link ECU componentry. AutoCentre Parts stocks the wider range of Link ECUs, sensors and looms, so you can source your full engine management wiring solution from one supplier.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373651927112,"sku":null,"price":64.81,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/101-0198.0.jpg?v=1790043577","url":"https:\/\/autocentreparts.co.nz\/products\/canjst4","provider":"Auto Centre Parts","version":"1.0","type":"link"}