Exhaust Gas Temperature Probe (EGT)

Name: Exhaust Gas Temperature Probe (EGT)
SKU: 41373651501128

SKU:

availability: Many in stock

$217.81
Additional charges will be calculated at checkout based on your delivery address.

Quantity

Subtotal: $217.81

Quantity must be 1 or more

1 customers are viewing this product

Exhaust Gas Temperature Probe (EGT)

Description
Shipping + Returns

Description

Details Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected wires Designed for extreme engine test & racing environments When using this with an ECU other than the Thunder, you will need to use an amplifier. Specifications Thermocouple type: K Range: -148 to 2372°F (-100 to 1300°C) Accuracy: +/-0.4% of reading or about +/- 1.1°C (Special Limits of Error) Probe diameter: 1/4 inch (0.250 inch) (6.35 mm) Sensing Junction: Exposed, Ungrounded Response Time*: 150 mS*Time Constant: Defined as the time required to reach 63.2% of an instantaneous temperature change Five time constants are required to approach 100% of the step change value Outer Sheath Material: Inconel, melting point 2550°F (1400°C) Cable: Stainless steel overbraiding over Teflon™ insulated, stranded wires, 20 gauge. 6ft / 1.8m in length. Compression Fitting: 316 stainless steel, adjustable, 1/8 inch –27 NPT male thread Wiring: + = Yellow – = Red

EGT probes are typically installed into the exhaust manifold or up-pipe of each cylinder or bank, close to the exhaust port, to give the most representative reading of that cylinder's combustion temperature. A CAN-based EGT module allows multiple probes to be read and sent to the ECU over a single CAN connection, keeping wiring simple even on a multi-channel install. Monitoring EGT is particularly useful on turbocharged, high-boost or aggressively tuned engines, where excessive exhaust temperature can be an early warning sign of a lean mixture or retarded ignition timing. This sensor is genuine Link Engine Management equipment, supplied by AutoCentre Parts New Zealand for use with compatible Link ECU systems. Accurate sensor input is essential for reliable ECU tuning and engine protection, so we recommend using genuine Link sensors alongside your Link ECU wherever possible. Our team is happy to help confirm compatibility with your specific ECU and wiring setup before you order.

Shipping + Returns

Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.

Returns Policy

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.

Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.

Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.

Shipping

Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.

Guaranteed Fitment

In-House Experts

Added Value

Free Delivery

Exhaust Gas Temperature Probe (EGT)

Returns Policy

Shipping

Recently Viewed Products

Your cart