{"product_id":"tcc04","title":"TCC04 4 Channel EGT to CAN Module","description":"\u003cp\u003eLink TCC04 4 Channel EGT to CAN module, powered by CA Nchecked The TCC04 EGT to CAN module allows you to connect up to four Type-K thermocouples and send the values via CAN bus and\/or monitor them directly on your wireless enabled device. Type-K thermocouples are suitable for various applications such as measuring exhaust gas temperature (EGT), temperatures before\/after the intercooler, turbo housings, cylinder head temperatures, water temperature, oil temperature and more. All measurements are cold junction compensated with a measuring range of 0 to 1250°C in 0.25°C resolution (14bit). The TCC04 feature a four-pin DTM connector for CAN\/power and miniature K-sockets. It is pin compatible with Links standard CAN pinout and CAN cables range. CAN 2.0A\/B standard is supported with flexible configuration. Wireless connectivity allows you to configure and update your module via smartphone or PC and query the current temperature and thermocouple status. Features: - 4 x cold junction compensated type-K inputs - Four-pin DTM connector \u0026amp; miniature K-sockets. - CAN Bus connection to ECU (Pre-Configured for Link ECU) - Measuring range from 0 to 1250°C (32 to 2282°F) with 0.25°C resolution - Detection of short circuit to ground or if no type-K is connected - Standard mini k thermocouple connector - Full configuration and monitoring over wireless - Adjustable sample frequency up to 100Hz\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e: 1 x CAN EGT Module 1 x DTM4 Mating Connector Kit 2 x Link Stickers Set-Up and Installation Guide\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eEGT probes are typically installed into the exhaust manifold or up-pipe of each cylinder or bank, close to the exhaust port, to give the most representative reading of that cylinder's combustion temperature. A CAN-based EGT module allows multiple probes to be read and sent to the ECU over a single CAN connection, keeping wiring simple even on a multi-channel install. Monitoring EGT is particularly useful on turbocharged, high-boost or aggressively tuned engines, where excessive exhaust temperature can be an early warning sign of a lean mixture or retarded ignition timing. This sensor is genuine Link Engine Management equipment, supplied by AutoCentre Parts New Zealand for use with compatible Link ECU systems.\u003c\/p\u003e","brand":"Link Engine Management","offers":[{"title":"Default Title","offer_id":41373651468360,"sku":null,"price":444.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0574\/9037\/4728\/files\/101-0384.0.jpg?v=1790043558","url":"https:\/\/autocentreparts.co.nz\/products\/tcc04","provider":"Auto Centre Parts","version":"1.0","type":"link"}